How To Make A Simple, Easy Macramé Plant Hanger

Subscribe to Nick Pileggi on YouTube

Nick, an experienced macrame artist, shares his knowledge on how to create a simple macrame plant hanger. This is an easy and inexpensive DIY project that can be used to display house plants in a space-saving way. Nick explains that all you need is a sturdy rope, a planter or pot, scissors, and a measuring tape (optional).

To begin, Nick suggests using either three or four pieces of rope, folded in half, depending on whether you want a three-sided or four-sided macrame hanger. He recommends a length of roughly 32 to 36 inches for the size of the pot, which should be doubled to ensure that there is enough rope. Nick then demonstrates how to make a gathering knot, which is a simple knot that will hold the ropes together.

Key Takeaways

  • Macrame hangers are an easy and inexpensive way to display house plants.
  • Use a sturdy rope, a planter or pot, scissors, and a measuring tape (optional).
  • To begin, use either three or four pieces of rope, folded in half, and make a gathering knot to hold the ropes together.
Popular Articles
Click Here To Follow Us On Instagram @PlantHunnies
Top 10 Easy To Care For Rare HouseplantsMust Have Amazon Plant Supplies
9 Genius Ideas For Your Houseplants5 Tips To Avoid Plant Failure
Top Houseplants To Propagate And SellStop Wasting Money on These Nightmare Plants
28 Houseplants With Weird and Unusual Leaves12 of The Healthiest Plants To Have In Your House

Materials Needed

To make a simple macrame plant hanger, one would need a rope, a planter or pot, scissors, and a measuring tape. The rope used can be any type of sturdy rope, such as macrame cord or jute rope. The length of the rope used for the hanger depends on the size of the pot. Nick recommends using roughly 32 to 36 inches of rope for the size pot used in the tutorial. The rope should be folded in half, and the length should be doubled to ensure there is enough rope to work with. It is recommended to add an extra foot of length for more leeway. For a three-sided macrame hanger, three pieces of rope are needed, and for a four-sided hanger, four pieces of rope are needed.

To start the project, Nick uses a wreath hook to hang the rope. A gathering knot is then tied to create a loop at the top of the hanger. The knot is made by wrapping a separate piece of rope around the three folded pieces of rope and pulling the loop up inside the knot. The bottom two pieces of rope are then cut off.

To create the part of the hanger that the planter will hang in, Nick ties knots using two pieces of rope that naturally fall together. The knots are tied at even intervals down the length of the rope, and they are not tightened completely until they are all even.

Preparing the Rope

To create a simple macrame plant hanger, one must first prepare the rope. The type of rope used can vary, but it should be sturdy enough to hold the weight of the planter. Nick in the video recommends using three millimeter macrame cord or jute rope, but any rope available at home can work.

To start, three or four pieces of rope are needed, depending on whether the hanger will have three or four sides. The rope should be folded in half at the center to create a loop at the top. The length of the rope should be roughly 32 to 36 inches, which will double when folded in half. For example, if the desired length of the hanger is 35 inches, at least 70 inches of rope should be used, with an additional foot or more for leeway.

A gathering knot is used to secure the loop at the top of the rope. This knot involves wrapping a separate piece of rope around the three folded ropes, forming a spiral knot. The top piece of the folded rope is then pulled through the loop created by the spiral knot, securing the knot in place. The two remaining pieces of rope can be cut off, and the gathering knot will serve as the starting point for the hanger.

Moving down the rope, knots are tied between pairs of two ropes that naturally fall together. These knots are tied loosely at first to ensure evenness and symmetry throughout the hanger. The knots will serve as the base for the planter to hang from.

Setting Up the Workspace

To create a simple macrame plant hanger, the first step is to gather the necessary materials. According to the video, the required materials include a sturdy rope, a planter or pot, scissors, a measuring tape, and a wreath hook. The rope used in the video is three-millimeter macrame cord, but any sturdy rope can be used.

To start the project, three or four pieces of rope are needed, which can be measured to be roughly 32 to 36 inches in length. The rope is then folded in half at the center, and a gathering knot is tied at the top of the rope. This knot is made by wrapping a separate piece of rope around the three folded pieces, forming a spiral knot. The two ends of the separate piece of rope are then pulled to create a loop at the top of the macrame hanger.

Moving down the rope, the next step is to create the part where the planter will hang. Two pieces of rope that naturally fall together are separated from the three folded pieces, and a simple knot is tied. This process is repeated with the remaining pairs of ropes, ensuring that the knots are even and not tightened completely yet.

Overall, the workspace setup for making a simple macrame plant hanger requires minimal materials and can be easily accomplished with a wreath hook and a few household items.

Creating the Gathering Knot

To start making a simple macrame plant hanger, one needs a sturdy rope, a planter or pot, scissors, and a measuring tape. The rope can be made of macrame cord, jute rope, or any other type of rope that is strong enough to hold the planter.

The first step is to fold three or four pieces of the rope in half at the center. For a pot of size 32 to 36 inches, the folded rope should be roughly 70 to 80 inches long. The folded rope is then hung over a wreath hanger or any other suitable object.

To make a loop at the top of the hanger, there are two methods. One can tie a simple knot with all the pieces of rope or use a gathering knot. The gathering knot is a simple and easy-to-tie knot that looks neater than a simple knot.

To tie a gathering knot, one needs a separate piece of rope, roughly two feet long. The rope is made into a loop and placed where the loop is desired on the hanger. The loop is then wrapped around the other ropes, holding it tightly and leaving the top piece sticking out. The leftover rope is then passed through the loop, and the top piece is pulled to tighten the knot. The two leftover pieces of rope are then cut off as close as possible to the knot.

The gathering knot is the most complicated knot in the project. The next step is to start tying the other types of knots that will hold the planter. The rope is separated into groups of two, and each group is tied in a simple knot. The knots are not tightened completely yet, as they need to be even as the hanger is made.

The hanger is made by tying more knots and alternating the groups of two ropes. The knots are tightened as the hanger is made, and the planter is placed inside the hanger once it is complete.

Starting the Macrame Hanger

To start making a simple macrame plant hanger, one will need a few materials. Nick, the expert in this tutorial, recommends using macrame cord, which is a sturdy rope that is perfect for this project. However, one can also use jute rope or any other type of rope that is sturdy enough to hold the planter.

Aside from the rope, a planter or pot is also necessary. Nick suggests basing the hanger around the size of the pot that will be used. In addition, scissors and a measuring tape are also needed. Although, if one is comfortable with measuring by sight, a measuring tape may not be necessary.

To get started, three or four pieces of rope are needed. Nick suggests using three pieces for a three-sided macrame hanger and four pieces for a four-sided macrame hanger. For this tutorial, Nick uses three pieces of rope that are folded in half at the center. He measures his macrame hangers to be roughly 32 to 36 inches, which means he needs at least 70 inches of rope. He suggests adding an extra foot for leeway, so he uses roughly 80-inch pieces of rope that are folded in half.

To begin making the hanger, Nick uses a wreath hook to hold the three pieces of rope. He then ties a gathering knot, which is a simple knot that is used to keep the ropes together. To do this, he takes one end of the rope and makes it into a loop. He then takes a separate piece of rope and wraps it around the other ropes, forming a spiral knot. He pulls the loop up and cuts off the extra rope. This gathering knot will be the most complicated knot used in this project.

Moving down the rope from the top, Nick starts making the part where the planter will hang. He separates the ropes into two groups of two and ties them in a knot. He repeats this process until he reaches the desired length for the hanger. This part of the process is kept super simple, with no complicated knots or spirals.

Tying the Basic Knots

To make a simple macrame plant hanger, one needs a sturdy rope, a planter or pot, scissors, and a measuring tape. The rope should be at least 70 inches long, folded in half to make a loop, and tied with a gathering knot. The gathering knot is made by wrapping a separate piece of rope around the three pieces of folded rope, forming a spiral knot that holds the loop together. The excess rope is then cut off, leaving a clean gathering knot.

Moving down the rope, the next step is to tie the basic knots that will form the hanger. Two pieces of rope that naturally fall together are separated, and a simple knot is tied around them. This is repeated with the other groups of two ropes, ensuring that the knots are as even as possible before tightening them.

With three pieces of rope, a three-sided macrame hanger is created, while four pieces create a symmetrical four-sided hanger. The length of the hanger is determined by personal preference, with 32 to 36 inches being a common size for the pot used in the tutorial.

Overall, tying the basic knots is a straightforward process that sets the foundation for creating a beautiful macrame plant hanger.

Adjusting Knot Placement

To adjust the placement of knots in a macrame plant hanger, the crafter can simply choose to tie the knots at different intervals along the length of the hanger. This can result in a more symmetrical or asymmetrical design, depending on the number of ropes used and the desired look.

For example, if using three pieces of rope, the resulting hanger will have three sides and a more asymmetrical look. If using four pieces of rope, the hanger will have four sides and a more symmetrical look.

To ensure the hanger is the desired length, the crafter can measure the length of each piece of rope and fold it in half, doubling the length. For a hanger that is roughly 32 to 36 inches in length, the crafter should start with at least 70 inches of rope, adding an extra foot for leeway.

Once the ropes are folded in half and the gathering knot is tied at the top, the crafter can begin tying knots at intervals along the length of the hanger to create the desired pattern. By adjusting the placement of these knots, the crafter can customize the look of the hanger to their liking.

Finishing Touches

After completing the macrame plant hanger, it’s time to add some finishing touches to make it look even better. One option is to add some decorative beads to the hanger. This can be done by threading the beads onto the rope before tying the knots. Another option is to add some fringes to the bottom of the hanger. To do this, simply cut the ends of the rope to the desired length and then unravel the strands to create a fringed effect.

It’s also important to make sure the hanger is sturdy and secure before hanging the plant. To do this, check that all knots are tight and secure. If any knots feel loose, simply tighten them by pulling on the ropes. It’s also a good idea to double-check that the hanger is the right size for the plant pot and that it can support the weight of the plant.

Once the finishing touches are complete and the hanger is secure, it’s time to hang the plant. Simply place the pot into the hanger and adjust the ropes as needed to ensure that the plant is hanging straight. With these final steps, the macrame plant hanger is complete and ready to be displayed in any room of the house.