DIY Living Wall Frames Using Air Plants And Orchids!

Subscribe to OrchidWeb on YouTube

Living wall art frames are a unique way to add greenery to any space. In this article, the process of creating a living wall art frame will be explained in detail. The materials needed for this project include a picture frame, wire mesh cut to size, a plastic corrugated board, preserved green sheet moss, fishing line, a staple gun, spray adhesive, scissors or shears, and pliers.

After preparing the frame and materials, the plant selection and arrangement process begins. The plants used in this article include Lelia Diana, a miniature Brazilian orchid, and two air plants from the genus Talanzia. The article goes on to explain how to attach the plants to the wire mesh using fishing line and how to add the plastic corrugated board. Finally, the article provides tips on how to hang the finished living wall art frame.

Key Takeaways

  • Living wall art frames require a picture frame, wire mesh, a plastic corrugated board, preserved green sheet moss, fishing line, a staple gun, spray adhesive, scissors or shears, and pliers.
  • Plant selection and arrangement are important steps in creating a living wall art frame.
  • The finished product can be hung using pins with loops or the wire mesh loops on the top margin.

Materials Needed

To create a living wall art frame, one will need the following materials:

  • Picture frame
  • Wire mesh, cut to size of the picture frame
  • Plastic corrugated board, cut to size of the picture frame
  • Preserved and dyed green sheet moss
  • Fishing line, colored green
  • Staple gun
  • Spray adhesive
  • Scissors or shears
  • Pliers

Additionally, one will need the following plants:

  • Lelia Diana, a miniature Brazilian orchid that produces beautiful purple flowers
  • Two air plants from the genus Talanzia, including Talanzia Bergerei and Talanzia Incarnata Bergerite

All of these materials can be found at a local hardware store, with the sheet moss available online.

To assemble the living wall art frame, one will start by attaching the wire mesh to the back of the picture frame using a staple gun. Then, the plants can be wired in place using fishing line, with the preserved and dyed green sheet moss added using spray adhesive. Finally, the plastic corrugated board can be attached to the back of the frame to keep the wire mesh in place.

Overall, creating a living wall art frame requires a hearty amount of preserved and dyed green sheet moss, along with the necessary tools and materials for attaching the plants and wire mesh to the picture frame.

Preparing the Frame

To make a living wall art frame, the following parts are needed: a picture frame, wire mesh cut to size, plastic corrugated board, preserved and dyed green sheet moss, fishing line, a staple gun, spray adhesive, scissors or shears, and pliers. These materials can be found at a local hardware store or online.

The plants selected for the living art frame include Lelia Diana, a miniature Brazilian orchid that produces beautiful purple flowers, and two air plants from the genus Talanzia: Talanzia Bergerei and Talanzia Incarnata.

To prepare the frame, start by taking the wire mesh cut to size and placing it on the back of the picture frame. Use a staple gun to attach the wire mesh to the top of the frame, making sure the edges are not poking out. If the wire mesh comes up a little bit short, tie the plastic corrugated board to the back to keep the wire mesh in place.

Before adding the plastic corrugated board, attach the plants while the wire mesh is free and easy to access. Start with the largest plant, Lelia Diana, at the top center. Remove Lelia Diana from its pot and arrange the plant’s roots. Use fishing line to tie the plant to the wire mesh, making sure to use excess fishing line to avoid coming up short.

Next, work with the Talanzias. Put the fishing line through the plant first and then attach it to the wire mesh. If necessary, redo the tying of a certain plant a couple of times to ensure it is secure.

Once the plants are tied in, add the sphagnum moss and position the plants the way you want them to be. Use spray adhesive to attach the sphagnum moss to the wire mesh. Fill in the pockets and make sure everything is in place before moving on to the next section.

The finished product is a living wall art frame that can be hung using pins with loops or loops on the top margin of the wire mesh. It is important to note that the living wall art pieces should be taken care of regularly.

Plant Selection

For the living wall art frames, several plants were selected for their aesthetic appeal and ease of growth. The first plant chosen was the Lelia Diana, a miniature Brazilian orchid that produces beautiful purple flowers. Two air plants from the genus Talanzia were also selected, including Talanzia Bergeri, which is extremely fast-growing and easy to care for, and Talanzia Incarnata Bergerite, which has a bright lime-green color and is covered with silvery hairs that lend it a silver appearance.

To attach the plants to the wire mesh, fishing line was used. The Lelia Diana was centered at the top of the frame, while the Talanzia plants were arranged in a triangle formation. The fishing line was fed through the wire mesh and tied around the plants to secure them in place. Excess sphagnum was removed from the plants’ roots before attaching them to the mesh.

Finally, the plants were decorated with preserved and dyed green sheet moss, which was attached to the wire mesh using spray adhesive. The finished product was a beautiful living wall art frame that can be hung using pins with loops or the wire mesh loops on the top margin.

Plant Arrangement

To create a living wall art frame, one needs a picture frame, wire mesh cut to size, plastic corrugated board, preserved and dyed green sheet moss for decoration, fishing line, staple gun, spray adhesive, scissors or shears, and pliers. These materials can be found at local hardware stores or online.

For the plants, the video recommends using Lelia Diana, a miniature Brazilian orchid that produces beautiful purple flowers, and two air plants from the genus Talanzia – Talanzia Bergerei and Talanzia In Carnata Bergerite. The latter is covered with silvery hairs that lend its silver color, while the former is extremely fast-growing and easy to grow.

To assemble the living wall art frame, one should start by stapling the wire mesh to the back of the picture frame using a staple gun. The mesh should be cut to size and lined up with the frame’s edges. He suggests pressing down at an angle so that the staple goes around the wire mesh. The plastic corrugated board can be tied to the back of the frame to keep the wire mesh in place.

Before adding the plastic corrugated board, the plants should be attached to the wire mesh. The largest plant, Lelia Diana, should be centered at the top, with Talanzia Bergerei and Talanzia In Carnata Bergerite arranged in a triangle formation. He removes Lelia Diana from its pot and arranges it with the roots gently going around the plant. Fishing line is used to secure the plant by feeding it through the wire mesh and tying knots against the mesh.

The Talanzia plants are easier to work with because they do not have a root system that needs to be tied into place. Fishing line is used to tie them to the wire mesh. He advises using excess fishing line to ensure that the plants are secure.

Once the plants are tied in, the sphagnum moss can be added with spray adhesive. He suggests first placing some adhesive on the wire mesh and then adding some to the sphagnum that will be used. The moss should be positioned around the plants to cover any gaps or messy sphagnum.

The finished product is a beautiful living wall art frame that can be hung using pins with loops or loops on the wire mesh. He recommends taking care of these living wall art pieces by misting them with water once a week and keeping them out of direct sunlight.

Attaching the Plants

To create a living wall art frame, a picture frame, wire mesh, plastic corrugated board, preserved and dyed green sheet moss, fishing line, staple gun, spray adhesive, scissors or shears, and pliers are required. The plants selected for this living art frame include Lelia Diana, a miniature Brazilian orchid that produces beautiful purple flowers, and two air plants from the genus Talanzia – Talanzia Bergerei and Talanzia Incarnata.

To attach the plants, the wire mesh is stapled to the back of the picture frame using a staple gun. The plastic corrugated board is then tied to the back to keep the wire mesh in place. The plants are arranged in a triangle formation, with Lelia Diana centered at the top and the two Talanzia plants in the corners.

To attach Lelia Diana, the excess sphagnum is removed from the plant’s roots, and the plant is arranged in the desired position. Fishing line is then fed through the wire mesh and tied around the plant’s roots to secure it in place. The same process is followed for the Talanzia plants, except that the fishing line is fed through the wire mesh first and then tied around the plant.

Once the plants are secured, the sheet moss is attached using spray adhesive. The finished product can be hung using loops on the wire mesh or pins with loops.

Adding the Plastic Corrugated Board

To assemble the living wall art frame, one needs a picture frame, wire mesh cut to size of the picture frame, plastic corrugated board, preserved and dyed green sheet moss, fishing line, staple gun, spray adhesive, scissors or shears, and pliers. The plants used for this project are Lelia Diana, Talanzia Bergerei, and Talanzia Incarnata Bergerite.

To start, the wire mesh is stapled to the top of the picture frame using a staple gun. The plastic corrugated board is then tied to the back of the frame using fishing line. Before adding the plastic corrugated board, plants are attached to the wire mesh using fishing line. Lelia Diana is placed at the center of the top and the two Talanzia plants are arranged in a triangle formation.

The plants are tied to the wire mesh by feeding the fishing line around the plant and tying knots against the wire mesh. Excess fishing line is used to ensure that the plants are secure. The decorative sheet moss is then added using spray adhesive.

The finished product is a living wall art frame that can be hung using pins with loops or loops on the top margin of the wire mesh. With a little creativity, one can substitute the materials used and make the project their own.

Applying the Sphagnum Moss

To create a living wall art frame, one needs a picture frame, wire mesh cut to size, plastic corrugated board, preserved and dyed green sheet moss, fishing line, a staple gun, spray adhesive, scissors or shears, and pliers. Additionally, one needs plants such as Lelia Diana, Talanzia Bergerei, and Talanzia Incarnata Bergerite.

To begin, one should staple the wire mesh to the picture frame using a staple gun. The plastic corrugated board can be tied to the back to keep the wire mesh in place. Before adding the plastic corrugated board, the plants can be attached to the wire mesh using fishing line.

First, the largest plant, Lelia Diana, should be centered at the top. The roots of the plant should be arranged in a triangle formation with the other plants. Fishing line can be used to tie the plants to the wire mesh.

Next, the Talanzia plants can be attached using fishing line. The plants can be positioned with the sphagnum moss. Spray adhesive can be used to attach the sphagnum moss to the wire mesh and plants.

Once the sphagnum moss is attached, the living wall art frame is complete. It can be hung using pins with loops or loops on the wire mesh.

Final Touches

To complete the living wall art frame, the wire mesh should be stapled to the back of the picture frame using a staple gun. The plastic corrugated board can then be tied to the back of the wire mesh to keep it in place. Before adding the plastic corrugated board, the plants should be attached to the wire mesh using fishing line. The largest plant, Lelia Diana, should be centered at the top, while the two air plants, Talanzia Bergerei and Talanzia Incarnata, should be arranged in a triangle formation.

To attach the plants, the fishing line should be fed through the wire mesh, wrapped around the plant, and tied in knots against the wire mesh. The excess fishing line can be cut off using scissors or shears. Once the plants are securely attached, the decorative sheet moss can be added using spray adhesive. The adhesive should first be sprayed on the wire mesh and then on the sheet moss.

The sheet moss can be wrapped around the plants and tucked into any gaps or pockets. The finishing touches can be added by positioning the plants and filling in any remaining gaps with more sheet moss. Once the living wall art frame is complete, it can be hung using pins with loops or by using the loops on the top margin of the wire mesh.

It is important to note that the process may require patience and attention to detail, especially when attaching the plants and positioning the sheet moss. However, with the right materials and a little creativity, anyone can create a beautiful living wall art frame to add a touch of nature to their home or office.

Hanging Options

When it comes to hanging living wall art frames, there are a few options available. One option is to use pins with loops, which can be found at a local craft store. Another option is to hang the frame from loops on the top margin of the wire mesh. These loops can be found on some wire meshes.

It is important to ensure that the frame is hung securely and that the weight of the plants is evenly distributed. This will help to prevent the frame from falling and damaging the plants.

Overall, there are various hanging options available for living wall art frames. It is important to choose the option that works best for the specific frame and to ensure that it is hung securely to protect the plants and the frame itself.

Living Wall Art Example

To create a living wall art frame, one needs a picture frame, wire mesh cut to size, plastic corrugated board, preserved and dyed green sheet moss, fishing line, a staple gun, spray adhesive, scissors or shears, and pliers. The plants used for the living art frame in this example are Lelia Diana, a miniature Brazilian orchid, and two air plants from the genus Talanzia – Talanzia Bergerei and Talanzia Incarnata Bergerite.

To assemble the frame, the wire mesh is stapled to the back of the picture frame using a staple gun. The plastic corrugated board is then tied to the back to keep the wire mesh in place. Before adding the plastic corrugated board, the plants are attached to the wire mesh using fishing line. Lelia Diana is centered at the top, while Talanzia Bergerei and Talanzia Incarnata Bergerite are arranged in a triangle formation.

The plants are secured to the wire mesh by tying knots against the mesh using excess fishing line. The decorative sheet moss is then attached to the wire mesh using spray adhesive. The finished product is a beautiful living wall art frame that can be hung using pins with loops or by using loops on the top margin of the wire mesh.

Overall, this living wall art example showcases how easy it is to create a beautiful and unique piece of art using preserved plants and simple materials that can be found at a local hardware store. With a little patience and creativity, anyone can create their own living wall art frame that is sure to impress.

Plant Care Tips

To create living wall art frames, one will need a picture frame, wire mesh cut to size, plastic corrugated board, preserved and dyed green sheet moss, fishing line, a staple gun, spray adhesive, scissors or shears, and pliers. These materials can be found at a local hardware store or online.

When selecting plants for the living art frame, it is recommended to choose easy-to-grow plants like Lelia Diana, a miniature Brazilian orchid that produces beautiful purple flowers, and two air plants from the genus Talanzia – Talanzia Bergeri and Talanzia Incarnata. Bergeri is extremely fast-growing, while Incarnata has a bright lime green color and is covered with silvery hairs.

To assemble the living art frame, start by stapling the wire mesh to the picture frame using a staple gun. Then, attach the plants to the wire mesh using fishing line and pliers. It is important to tie the plants securely to the wire mesh to prevent them from falling off. After attaching the plants, add the plastic corrugated board to the back of the frame to keep the wire mesh in place.

Next, add the preserved and dyed green sheet moss to the wire mesh using spray adhesive. It is recommended to do this in a well-ventilated area and to wear gloves if sensitive to the adhesive. Finally, position the plants and sheet moss to create the desired look.

To hang the living art frame, one can use pins with loops or hang it from the loops on the wire mesh. With proper care, the plants in the living art frame will continue to grow and thrive.